MARCO MISCELLANEOUS ROLLS WITH BEARINGS

SERIES M15 (and M14) IDLER REPAIR PARTS

MISCELLANEOUS ROLLS WITH BEARINGS

M14G-106-5
4˝" dia. X 5? Roll with Bearings (including two M15G-103 Bearings)

i

*M15FS-106-4 2˝" dia. X 4ž" Roll w/ Bearings, (includes two M15G-103 Bearings – form M14 and M15 Self-Aligning Idlers and M15 Side Gujide Idlers).

i

*M15M-106-5 5" Roll with Rubber Impact Discs x 5˝" long

*M15M-106-6 5" Roll with Rubber Impact Discs x 6˝" long

*M15M-106-8 5" Roll with Rubber Impact Discs x 8˝" long

*M15M-106-10 5" Roll with Rubber Impact Discs x 10˝" long

*M15M-106-12 5" Roll with Rubber Impact Discs x 12˝" long

*M15M-106-14 5" Roll with Rubber Impact Discs x 14˝" long

i

*M15M-106-16 5" Roll with Rubber Impact Discs x 16˝" long

*M15M-106-18 5" Roll with Rubber Impact Discs x 18˝" long

*M15M-106-22 5" Roll with Rubber Impact Discs x 22˝" long

i

*M15M-106-24 5" Roll with Rubber Impact Discs x 24˝" long

SUPPORT BRACKETS

M15-108-5 Self-Aligning Guide Idler Bracket and Shaft, with Lock Ring.

i

*M15G-102-3 Side Guide Idler Bracket and Shaft, with Lock Ring (when used on M14 Idlers, remove Square Head Set Screw and replace with Hollow Head Set Screw).

i

M15-108-2 Clamp Plate with Assembly Bolts (for above M15-108-5 And M15G-102-3 Brackets).

i

*M15R-101-1 Return Idler Mounting Bracket with Draw Bolt and Nut.

i

M14-102-1 Center Bracket with Shaft (for M14 45° Idlers)

* These parts are interchangeable between the M15 and M14 Series.

Š Copyright 1999 E. F. Marsh Engineering Company. All Rights Reserved.
None of the images or specifications on this site may be reproduced without the express written consent of E. F. Marsh Engineering Company.